Energy saving, environmental protection, green has become the hot topic of all people. Energy saving, environmental protection, green LED has become a stage lighting industry, a small wizard.

With the development of the industry, more and more people use LED stage lamps instead of the traditional stage lamps. Use LED stage lamps need to pay attention to the following issues:

1, LED stage lighting products in the process of production to take measures to prevent static electricity, such as: the work table to meet, the workers with anti-static ring, anti-static gloves, etc., if the conditions allow to wear anti-static clothing is necessary. Or can be installed anti electrostatic ion blower, at the same time to ensure that the humidity of the workshop production at 65%, in order to avoid the air is too dry electrostatic, especially green LED lamp is easy to be damaged by ESD. In addition, antistatic ability of different quality grade of the LED lamp beads are not the same, the quality, high grade of the LED lamp bead antistatic ability is stronger.

2, some manufacturers in order to reduce the cost of products using the "resistance capacity of the buck" way to the LED stage lights products, which will directly affect the life of LED stage lamps. Should use special switching power supply (preferably with constant current source) to the LED product supply, so that will not affect the product's service life, despite the relatively high cost of the product.

3, the temperature will make the LED smaller internal resistance. When the ambient temperature increased, the internal resistance of the LED light source will be reduced, if the use of stabilized voltage power supply will leads to the increase of the working current of the LED, when more than the rated current, the service life of LED products, serious will be "burned out" LED light source. Therefore, we should use constant current source power supply, to ensure that the working current of the LED is not affected by the influence of the outside temperature. Stage lighting equipment

4, LED product seal. LED stage lamp products are often used in outdoor, also facing the waterproof, moisture seal problems, if not handled properly will directly affect the service life of LED products. Some of the high quality requirements for manufacturers to use the traditional epoxy resin "watering" method to seal LED products, this method is more troublesome, for the larger size of the LED products (such as LED fence lamp) is not very suitable, but also cause the increase in product weight.